piwik image


NTN NJ315EG1C4 Cylindrical Roller Bearing, 75 mm Dia Bore, 160 mm OD, 1 Row, 37 mm W, 263000 N Load

  • Item#: NJ315EG1C4
  • Mfr#: NJ315EG1C4
  • UPC: 4547359123593
  • Can receive single direction axial loads
  • When there is no distinction between the fixed side and floating side bearing, can be used as a pair in close proximity
  • High capacity cylindrical roller bearings
  • High strength machined brass rivetless cage with square holes
  • ISO class 0 tolerance rating
  • C4 radial clearance greater than C3
  • Round bore
  • 240000 N dynamic/263000 N static
  • Without oil hole
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Cylindrical Roller Bearing have rollers which are essentially cylindrical in shape. This provides a modified line contact with the cylindrical inner and outer ring raceways, while the rollers are guided by ground ribs on either the inner or outer ring. The cylindrical shape allows the inner ring to have axial movement relative to the outer ring (except the NH type). This is especially important when accommodating thermal expansion when both rings must be press fitted. In this series, the NJ, NF and NH types can carry light or intermittent thrust loads. The NN3000 and NN3000K series are available in high precision tolerances and are well suited for use in machine tool spindles.

NTN Cylindrical Roller Bearing, Series: NJ3, 75 mm Bore Dia, 160 mm Outside Dia, 1 Row, 37 mm W, Open Closure, 263000 N, Hardened Alloy Steel Bearing, Machined Brass Cage, 4000 rpm Grease/4700 rpm Oil Maximum, -40 to 120 deg C


Bearing Material      :      Hardened Alloy Steel
Cage Material      :      Machined Brass
Closure Type      :      Open
Maximum Speed      :      4000 rpm Grease/4700 rpm Oil
Series      :      NJ3
Temperature Rating      :      -40 to 120 deg C
Bore Diameter      :      75 mm
Outside Diameter      :      160 mm
Number of Rows      :      1
Width      :      37 mm
Load Capacity      :      263000 N


  • pdf