NTN 7018CDB/GLP5 70 Series Round Bore Angular Contact Ball Bearing, 90 mm Dia Bore, 140 mm OD, 2 Rows, 48 mm W, 15 deg, 127 kN Load
Angular contact ball bearings are non-separable bearings which have a certain contact angle in the radial direction relative to the straight line that runs through the point where each ball makes contact with the inner and outer rings. In addition to radial loads, single direction axial loads can also be accommodated by angular contact ball bearings. Furthermore, since an axial load is generated from a radial force, these bearings are generally used in pairs facing each other. Standard type, high speed use type and ultra high speed varieties of angular contact ball bearings are available through NTN, and there are also many duplex varieties. A bearing accuracy of JIS Class 5 or higher is applied to duplex type angular contact ball bearings, and in many cases they are given a preload, in compliance with standard preload levels, before being used in an application.
NTN Angular Contact Ball Bearing, Round Bore, Series: 70 Series, 90 mm Bore Dia, 140 mm Outside Dia, 2 Rows, 48 mm W, 15 deg Contact, Open Closure, 127 kN, High Carbon Chrome Steel Bearing, Nylon Cage, 8670 rpm Grease/13855 rpm Oil Maximum, -40 to 120 deg C
Product Type | : | Round Bore |
Bearing Number | : | 70 Series |
Cage Material | : | Nylon |
Bearing Material | : | High Carbon Chrome Steel |
Closure Type | : | Open |
Contact Angle | : | 15 deg |
Load Capacity | : | 127 kN |
Maximum Speed | : | 8670 rpm Grease/13855 rpm Oil |
Outside Diameter | : | 140 mm |
Number of Rows | : | 2 |
Bore Diameter | : | 90 mm |
Mounted | : | No |
Temperature Rating | : | -40 to 120 deg C |
Measurement System | : | Metric |
Width | : | 48 mm |