piwik image


NTN 6000ZC3/5K 60 Series Round Bore Standard Small Deep Groove Radial Ball Bearing, 10 mm Dia Bore, 26 mm OD, 1 Rows, 8 mm W, 4550 N Load

  • Item#: 6000ZC3/5K
  • Mfr#: 6000ZC3/5K
  • UPC: 4547359542264
  • The sealed V-slot around the inner ring creates an air and grease pocket which increases the labyrinth effect
  • This is a non-contact, low-friction torque type bearing assembly, which can be used effectively for general protection
  • ISO class 0 precision rating
  • Single shielded seal
  • Kyodo Yushi Multemp SRL prelubricant
  • C3 radial internal clearance greater than normal
  • 4550 N dynamic/1960 N static
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Deep groove ball bearings are very widely used. A deep groove is formed on each inner and outer ring of the bearing enabling them to sustain radial and axial loads in either direction as well as well as the complex loads which result from the combination of these forces. Deep groove ball bearings are suitable for high speed applications.

NTN Deep Groove Radial Ball Bearing, Round Bore Standard Small, Series: 60 Series, 10 mm Bore, 26 mm OD, 1 Rows, 8 mm Width, Single Shield Closure, 4550 N Load, High Carbon Chrome Steel Bearing, Pressed Steel Cage, 29000 rpm Grease/34000 rpm Oil Maximum, -40 to 120 deg C


Bearing Material      :      High Carbon Chrome Steel
Cage Material      :      Pressed Steel
Closure Type      :      Single Shield
Maximum Speed      :      29000 rpm Grease/34000 rpm Oil
Series      :      60 Series
Temperature Rating      :      -40 to 120 deg C
Type      :      Round Bore Standard Small
Bore Diameter      :      10 mm
Outside Diameter      :      26 mm
Number of Rows      :      1
Width      :      8 mm
Load Capacity      :      4550 N


  • pdf