piwik image


MorseĀ® RaiderĀ® Plus XD1093 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Left Output, 1 hp, 10:1 Gear Ratio, 175 rpm Maximum Output, 58.52 in-lb Input/175 in-lb Output Torque Rating

  • Item#: 175Q56L10
  • Mfr#: XD1093
  • UPC: 662288343233
  • Rugged cast iron housing provides maximum strength and dependability
  • High lead angle worm is case hardened, ground and polished
  • Large, single row ball bearings on input shaft to absorb radial and thrust loads at higher input speeds
  • Tapered roller bearings are used on output shaft
  • Forged bronze worm gears provide optimum balance of strength and wear
  • Heavy duty tapered roller bearings on all output shafts
  • 56C motor frame size
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.

Morse® Raider® Plus Worm Gear Reducer, Single Reduction Standard, 10:1 Gear Ratio, 1 hp, C-Face Quilled Input, Left Output, 5/8 in Dia Input, 7/8 in Dia x 2.05 in L Output, 175 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 58.52 in-lb Input/175 in-lb Output, 1-3/4 in Centre Distance, 3/16 x 3/32 in Input Keyway, 80 % Efficiency, Polyglycol Oil Lubrication, Direct/Floor Mount, Cast Iron, 7.33 in L x 6.78 in W x 5.75 in H


Centre Distance      :      1-3/4 in
Dimensions      :      7.33 in L x 6.78 in W x 5.75 in H
Efficiency      :      80 %
Input Maximum Speed      :      1750 rpm
Input Size      :      5/8 in Dia
Keyway Size      :      3/16 x 3/32 in Input
Lubrication Type      :      Polyglycol Oil
Material      :      Cast Iron
Mounting Type      :      Direct/Floor
Output Size      :      7/8 in Dia x 2.05 in L
Type      :      Single Reduction Standard
Input Type      :      C-Face Quilled
Output Type      :      Left
Horsepower      :      1 hp
Gear Ratio      :      10:1
Output Maximum Speed      :      175 rpm
Torque Rating      :      58.52 in-lb Input/175 in-lb Output


  • pdf
  • pdf
  • pdf
    Specification Sheet