Locations
Morse®
172701
Morse® 172701 B200 Mechanical CAM Clutch With 0.19 in W x 0.09 in D Keyway, 0.739/0.74 in Dia Bore, 1.8483/1.8498 in OD, 50 ft-lb Torque, 2500 rpm Overrunning Max
- Item#: B204A CL
- Mfr#: 172701
- UPC: 662288407935
- Clutches require bearing support to assure concentricity between inner and outer races
- Taper on this shaft should not exceed 0.0002 in
- No inner race
- Rugged cam clutch designed for applications where space and weight are factors in clutch selection
- Input shaft used as the inner race must be hardened and ground to size
- Interchangeable with competitors product
- Lubrication required
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
The B200/B500 series clutches share the same design. A full complement of cams is retained in an outer race. This requires a bearing supported hardened shaft as the inner race. These are primarily used for back stopping applications. It can also be used for indexing and overrunning applications as well. The B200 series has the same outside diameter as a metric 200 series ball bearing. This makes it easy to facilitate assembly adjacent to the ball bearing. The B500 series was created as a replacement backstop for many different gear reducers. It comes in many different diameters and generally has a larger cam than the B200 series clutch. Both series come pre-lubricated with special light grease. In service they can be lubricated with either grease or oil.
Morse® Mechanical CAM Clutch, Series: B200, 0.739/0.74 in Bore, 1.8483/1.8498 in OD, 1 in Overall Length, 50 ft-lb Torque, 2500 rpm Overrunning Maximum, Shaft Mounting, 1 in W Dimensions
SPECIFICATIONS
| Dimensions | : | 1 in W |
| Mounting Type | : | Shaft |
| Overall Length | : | 1 in |
| Series | : | B200 |
| Bore Diameter | : | 0.739/0.74 in |
| Outside Diameter | : | 1.8483/1.8498 in |
| Torque Rating | : | 50 ft-lb |
| Maximum Speed | : | 2500 rpm Overrunning |
