Martin MTTU35-24 Tube Take-Up Frame, 24 Travel, 10 in W Base, 28 in L Bolt Center-to-Center, 4-1/2 in W Bolt Center-to-Center
A properly designed belt conveyor will require the use of a take-up device. This device will take up the stretch in the conveyor belt and keep proper tension at the drive pulley to reduce slippage. A dynamic type, like a gravity take-up, is generally preferred but not always practical due to space or cost. Martin screw take-up frames are a good solution for these applications. Martin offers several types of frames that accommodate most bearings, mounting positions and travel. Martin take-up frames are available in stock or made-to-order for all of your mechanical take-up needs.
Martin Tube Take-Up Frame, 24 Travel, 10 in Base Width, 28 in Bolt Center-to-Center Length, 4-1/2 in Bolt Center-to-Center Width, 1-3/4 in Height to Center Line, MTTU35 Frame, Steel
Base Width | : | 10 in |
Bolt Center-to-Center Length | : | 28 in |
Bolt Center-to-Center Width | : | 4-1/2 in |
Frame Type | : | MTTU35 |
Height to Center Line | : | 1-3/4 in |
Material | : | Steel |
Mounted | : | Yes |
Travel | : | 24 |
Measurement System | : | Unspecified |