Locations
Martin
C4-45TI-48
Martin C4-45TI-48 Medium Duty Equal Impact Troughing Idler, C CEMA Rating, 4 in Dia Roll, 45 deg Trough Angle, 48 in W Belt, Steel
- Item#: C4-45TI-48
- Mfr#: C4-45TI-48
- UPC: 697950821436
- External shield deters impurities from entering the bearing housing
- Flinger design removes contaminates away from the bearing housing by centrifugal force
- Martin triple labyrinth seal is grease filled that offers an additional level of protection from contaminants and water ingress impacting the bearing
- The contact lip seal adds additional level of protection
- CEMA C idlers have sealed for life ball bearings
- CEMA C idlers offers extremely low rolling resistance that allows for lower operating cost
- Patent pending idler end welding allows for protection against belt wear
- 0.88 in solid steel shaft machined down to 20 mm at each end
- Martin idlers have exceptionally low TIR runout
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Impact troughing idlers are located at loading and transfer points. The rollers are equipped with rubber discs that cushion the impact and reduce costly belt damage. Impact idler frames are reinforced to reduce bending and withstand heavy material loads.
Martin Equal Impact Troughing Idler, Medium Duty, C CEMA, 4 in Roll Dia, 45 deg Trough angle, 48 in Belt Width, Sealed Ball Bearing, 17.63 in Roller Length, 57 in Distance Between Mounting Holes, 44.18 in Distance Between Roller Ends, Steel
SPECIFICATIONS
| Bearing Type | : | Sealed Ball |
| Distance Between Mounting Holes | : | 57 in |
| Distance Between Roller Ends | : | 44.18 in |
| Roller Length | : | 17.63 in |
| Type | : | Medium Duty |
| CEMA Rating | : | C |
| Roll Diameter | : | 4 in |
| Trough Angle | : | 45 deg |
| Belt Width | : | 48 in |
| Material | : | Steel |
