piwik image

Martin C4-35U-36-09

Martin C4-35U-36-09



Martin C4-35U-36-09 Medium Duty Unequal Troughing Idler, C CEMA Rating, 4 in Dia Roll, 35 deg Trough Angle, 36 in W Belt, Steel

  • Item#: C4-35U-36-09
  • Mfr#: C4-35U-36-09
  • UPC: 697950846743
  • External shield deters impurities from entering the bearing housing
  • Flinger design removes contaminates away from the bearing housing by centrifugal force
  • Martin triple labyrinth seal is grease filled that offers an additional level of protection from contaminants and water ingress impacting the bearing
  • The contact lip seal adds additional level of protection
  • CEMA C idlers have sealed for life ball bearings
  • CEMA C idlers offers extremely low rolling resistance that allows for lower operating cost
  • Patent pending idler end welding allows for protection against belt wear
  • 0.88 in solid steel shaft machined down to 20 mm at each end
  • Martin idlers have exceptionally low TIR runout
  • 09-guage wall thickness
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Unequal troughing idlers (picking) are used due to their lower profile design. Typically consist of one long roll in the center and two short inclined wing rollers. This design lays out the material and allows for easy sorting and separation. Unequal troughing idlers (picking) are available with steel or impact rollers.

Martin Unequal Troughing Idler, Medium Duty, C CEMA, 4 in Roll Dia, 35 deg Trough angle, 36 in Belt Width, Sealed Ball Bearing, 19-3/4 in Roller Length, 45 in Distance Between Mounting Holes, 35.71 in Distance Between Roller Ends, Steel


Bearing Type      :      Sealed Ball
Distance Between Mounting Holes      :      45 in
Distance Between Roller Ends      :      35.71 in
Roller Length      :      19-3/4 in
Type      :      Medium Duty
CEMA Rating      :      C
Roll Diameter      :      4 in
Trough Angle      :      35 deg
Belt Width      :      36 in
Material      :      Steel


  • pdf
  • pdf
    Specification Sheet