Martin Hi-Cap® 1 3V 1060 SDS Arm/Spoke Type C-3 Single Groove Sheave, QD® Bushed Bore, 1/2 to 2 in Dia Bore, 10.6 in OD, 10.55 in Dia Pitch, 3/4 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
Martin Hi-Cap® Single Groove Sheave, Arm/Spoke Type C-3, QD® Bushed Bore, 1/2 to 2 in Bore, 10.6 in OD, 10.55 in Pitch Diameter, 3/4 in Face Width, SDS Bushing, 1.38 in Overall Length, For Use With: 3V-Cross Section V-Belts, Cast Iron
Bushing Type | : | SDS |
Material | : | Cast Iron |
Overall Length | : | 1.38 in |
Suitable For Use With | : | 3V-Cross Section V-Belts |
Type | : | Arm/Spoke Type C-3 |
Bore Type | : | QD® Bushed |
Bore Diameter | : | 1/2 to 2 in |
Outside Diameter | : | 10.6 in |
Pitch Diameter | : | 10.55 in |
Face Width | : | 3/4 in |