piwik image

Link-Belt® PB22432H

Link-Belt® PB22432H



Link-BeltĀ® PB22432H B22400 Pillow Block Spherical Roller Bearing, 2 in Dia Bore, 6-1/4 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-1/8 in OAL x 4-9/16 in OAH

  • Item#: PB22432H
  • Mfr#: PB22432H
  • UPC: 662327109813
  • Spring locking collar locks inner ring securely to shaft
  • Long inner ring for high stability and load support
  • Self aligning double row
  • Double contoured retainer pockets
  • Slotted bolt holes in pillow block
  • Extended inner ring, separable outer rings
  • Misalignment capabilities total of 4 deg
  • Factory set clearance and lubrication
  • Field interchangeable seals
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Self aligning double row spherical roller bearings are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radial-thrust loads. Osculation clearance at the ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.

Link-Belt® Pillow Block Spherical Roller Bearing, Series: B22400, 2 in Bore, 6-1/4 in Bolt Center-to-Center Length, 2-1/4 in Base to Bore Centerline, 8-1/8 in Overall Length, 3-1/8 in Overall Width, 4-9/16 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2-1/2 in Base Width, Single Set Screw Collar Locking Device, Clearance/Floating Labyrinth Seal, Non-Expansion (Fixed) Expansion, 25900 lb Dynamic/33200 lb Static Load, 225 deg F, 2800 rpm Maximum, Cast Iron, Powder Coated


Base Width      :      2-1/2 in
Bore Type      :      Round
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      25900 lb Dynamic/33200 lb Static
Locking Device      :      Single Set Screw Collar
Material      :      Cast Iron
Maximum Speed      :      2800 rpm
Mounting Type      :      Two-Bolt Base
Overall Width      :      3-1/8 in
Seal Type      :      Clearance/Floating Labyrinth
Series      :      B22400
Temperature Rating      :      225 deg F
Bore Diameter      :      2 in
Bolt Center-to-Center Length      :      6-1/4 in
Base to Bore Centerline      :      2-1/4 in
Overall Length      :      8-1/8 in
Overall Height      :      4-9/16 in