piwik image


Koyo JTT-1014 Inch Series Caged Open Ends Round Bore Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 13/16 in OD, 1 Row, 7/8 in W, 2640 lb Dynamic/4240 lb Static Load

  • Item#: JTT-1014
  • Mfr#: JTT-1014
  • UPC: 605790217418
    • Caged bearings provide high speed and maximum lubricant retention capability
    • Pre-packed with general purpose ball and roller bearing grease unless otherwise specified
    • Speed rating based on shaft contact speed of 610 m/min
    • Reduce the listed speed rating by one-half for outer ring rotation
    • Best used for good radial load capacity and high speeds for thin cross section applications
    • A hardened and machined shaft or an "IR" inner ring is required for optimal performance
    • A press fit into the housing is required
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.

Koyo Drawn Cup Needle Roller Bearing, Caged Open Ends Round Bore, Series: JTT Inch Series, 5/8 in Bore, 13/16 in OD, 1 Row, 7/8 in Width, Double Seal Closure, 2640 lb Dynamic/4240 lb Static Load, Carbon Steel Bearing, Steel Cage, 12000 rpm Grease Maximum, -30 to 110 deg C


Bearing Material      :      Carbon Steel
Cage Material      :      Steel
Closure Type      :      Double Seal
Maximum Speed      :      12000 rpm Grease
Series      :      JTT Inch Series
Temperature Rating      :      -30 to 110 deg C
Type      :      Caged Open Ends Round Bore
Bore Diameter      :      5/8 in
Outside Diameter      :      13/16 in
Number of Rows      :      1
Width      :      7/8 in
Load Capacity      :      2640 lb Dynamic/4240 lb Static