piwik image

Gates® 94141277

Gates® 94141277



Gates® Super HC® 94141277 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 127.7 in L Outside, 35/64 in THK, EPDM

  • Item#: 5VX1277
  • Mfr#: 94141277
  • UPC: 770075152439
  • Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
  • Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
  • Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
  • Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Constructed with Gates® proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as transmitting more horsepower than the classical cross-sections in the same amount of drive space.

Gates® Super HC® V-Belt, Heavy Duty Molded Notch, Series: 9414, 5VX Section, 5/8 in Top Width, 127.7 in Outside Length, 35/64 in Thickness, 1 Rib, 7.958 in Diameter Minimum Pulley, -70 to 250 deg F, EPDM, Flex-Bonded Polyester Reinforced When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of ?ex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, o?ering signifcant benefts over classical section V-belts.


Minimum Pulley Diameter      :      7.958 in
Number of Ribs      :      1
Reinforced Material      :      Flex-Bonded Polyester
Series      :      9414
Temperature Range      :      -70 to 250 deg F
Type      :      Heavy Duty Molded Notch
Section Size      :      5VX
Top Width      :      5/8 in
Outside Length      :      127.7 in
Thickness      :      35/64 in
Material      :      EPDM