piwik image


FAG 24124-BE-XL-C3 Cylindrical Bore Spherical Roller Bearing, 120 mm Dia Bore, 200 mm OD, 2 Rows, 80 mm W, 950 kN Load

  • Item#: 24124-E1-C3
  • Mfr#: 24124-BE-XL-C3
  • UPC: 4012802299847
  • Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
  • Relatively high axial loads occur on one or both sides, in addition to high radial forces
  • Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
  • High shock type loads must be supported dynamically
  • Locating bearings with a very high load carrying capacity are required
  • Two sheet steel cages, surface hardened, guidance on inner ring
  • X-life design
  • C3 radial internal clearance
  • Loose central rib
  • 680 kN dynamic/950 kN static
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.

FAG Spherical Roller Bearing, Cylindrical Bore, Series: 241-BE, 120 mm Bore, 200 mm OD, 2 Rows, 80 mm Width, Open Closure, 950 kN Load, Sheet Steel Cage, 2950 rpm Maximum, -30 to 200 deg C


Cage Material      :      Sheet Steel
Closure Type      :      Open
Maximum Speed      :      2950 rpm
Series      :      241-BE
Temperature Rating      :      -30 to 200 deg C
Type      :      Cylindrical Bore
Bore Diameter      :      120 mm
Outside Diameter      :      200 mm
Number of Rows      :      2
Width      :      80 mm
Load Capacity      :      950 kN