Locations
FAG
22207-E1-XL-K-C3
FAG 22207-E1-XL-K-C3 Tapered Bore Spherical Roller Bearing, 35 mm Dia Bore, 72 mm OD, 2 Rows, 23 mm W, 89 kN Load
- Item#: 22207-E1-K-C3
- Mfr#: 22207-E1-XL-K-C3
- UPC: 4026677804624
- Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
- Relatively high axial loads occur on one or both sides, in addition to high radial forces
- Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
- High shock type loads must be supported dynamically
- Locating bearings with a very high load carrying capacity are required
- Two sheet steel cages, surface hardened or coated, guidance on outer ring
- X-life design
- 1:12 tapered bore
- C3 radial internal clearance
- Without central rib on inner ring
- 89 kN dynamic/81 kN static
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.
FAG Spherical Roller Bearing, Tapered Bore, Series: 222-E1, 35 mm Bore, 72 mm OD, 2 Rows, 23 mm Width, Open Closure, 89 kN Load, Sheet Steel Cage, 10700 rpm Maximum, -30 to 200 deg C
SPECIFICATIONS
| Cage Material | : | Sheet Steel |
| Closure Type | : | Open |
| Maximum Speed | : | 10700 rpm |
| Series | : | 222-E1 |
| Temperature Rating | : | -30 to 200 deg C |
| Type | : | Tapered Bore |
| Bore Diameter | : | 35 mm |
| Outside Diameter | : | 72 mm |
| Number of Rows | : | 2 |
| Width | : | 23 mm |
| Load Capacity | : | 89 kN |
