piwik image


Dodge® 129445 208 Normal Duty Pillow Block Ball Bearing Unit, 5.18 to 5.88 in L Bolt Center-to-Center, 2.13 in Base to Bore Centerline, 7-1/4 in OAL x 4.19 in OAH

  • Item#: 161116
  • Mfr#: 129445
  • UPC: 782475861736
    • Wide inner ring
    • Patented pull/push thin wall adapter system
    • Ideal for high-speed applications in which concentricity is important
    • Little or no bearing vibration at high speeds
    • More efficient fan balancing
    • Decreased labor during removal with no shaft reconditioning
    • Alleviates setscrew issues due to vibration
    • Patented DualGuard™ seal, featuring the rubberized flinger is standard
    • Without adapter sleeve and locknut
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading


The Dodge® Grip-Tight® mounted ball bearing is the maintenance-friendly solution for all of your ball bearing application needs, capable of performing critical functions in many operations. Grip-Tight® mounted ball bearings offer a unique method of shaft attachment via a thin wall tapered adapter sleeve and locknut design. Because of this system, bearing assemblies may be installed and removed from a shaft easily. 360 deg of concentric grip on the shaft for the entire length-through-bore of the bearing means Grip-Tight® provides a tight press fit with no shaft damage, even on commercial grade shafting.

Dodge® Pillow Block Ball Bearing Unit, Normal Duty, Series: 208, 5.18 to 5.88 in Bolt Center-to-Center Length, 2.13 in Base to Bore Centerline, 7-1/4 in Overall Length, 1.84 in Overall Width, 4.19 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.93 in Base Width, Grip-Tight® Adapter Mounted Locking Device, Single Lip Seal, Non-Expansion (Fixed) Expansion, 7332 lb Dynamic/4475 lb Static Load, 8500 rpm Maximum, Cast Iron, Powder Coated


Base Width      :      1.93 in
Bore Type      :      Round
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      7332 lb Dynamic/4475 lb Static
Locking Device      :      Grip-Tight® Adapter Mounted
Material      :      Cast Iron
Maximum Speed      :      8500 rpm
Mounting Type      :      Two-Bolt Base
Overall Width      :      1.84 in
Seal Type      :      Single Lip
Series      :      208
Type      :      Normal Duty
Bolt Center-to-Center Length      :      5.18 to 5.88 in
Base to Bore Centerline      :      2.13 in
Overall Length      :      7-1/4 in
Overall Height      :      4.19 in


  • pdf
  • pdf
    Line Drawing
  • pdf
    Specification Sheet
  • pdf
    Owners/User Manual