S30-10 TL HUB
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
Dodge® Weld-On Hub, Taper-Lock Type S, 4-1/4 in Bore Dia, 5-1/4 in Outside Dia, 5-1/8 in Pilot Dia, 4 in Bolt Circle Dia, 2 Bolt Holes, 2 in Overall Length, Steel
Type | : | Taper-Lock Type S |
Pilot Diameter | : | 5-1/8 in |
Number of Bolt Holes | : | 2 |
Bore Diameter | : | 4-1/4 in |
Outside Diameter | : | 5-1/4 in |
Bolt Circle Diameter | : | 4 in |
Overall Length | : | 2 in |
Material | : | Steel |
Bushing Type | : | Taper-Lock |
Integral Key | : | No |