P2B-SD-106
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
Dodge® Pillow Block Roller Bearing Unit, Special Duty, Series: 107, 1-3/8 in Bore, 6.88 to 7.63 in Bolt Center-to-Center Length, 2.88 in Base to Bore Centerline, 9 in Overall Length, 4 in Overall Width, 6-1/4 in Overall Height, Two-Bolt Base Mounting, Tapered Bore, 3 in Base Width, Tapered Adapter Sleeve Locking Device, Piston Ring Seal, Non-Expansion (Fixed), 725 lb Load, 3000 rpm Maximum, Cast Iron, Black Oxide
Base Width | : | 3 in |
Type | : | Tapered Roller |
Base to Bore Centerline | : | 2.88 in |
Series | : | 107 |
Bolt Center-to-Center Length | : | 6.88 to 7.63 in |
Mounting Type | : | Two-Bolt Base |
Expansion Type | : | Non-Expansion (Fixed) |
Locking Device | : | Tapered Adapter Sleeve |
Finish | : | Black Oxide |
Overall Length | : | 9 in |
Bore Type | : | Tapered |
Load Capacity | : | 725 lb |
Material | : | Cast Iron |
Maximum Speed | : | 3000 rpm |
Overall Width | : | 4 in |
Inside Diameter | : | 1-3/8 in |
Mounted | : | Yes |
Overall Height | : | 6-1/4 in |
Seal Type | : | Piston Ring |