Purvis Industries

SAFS steel housing features include solid cast feet to increase strength, large capacity oil sump with two oversized drain holes adaptable to circulating oil systems, cast in oil return slots to keep lubricants in, oil-equalization passage allowing pillow block to be drained completely from either side, offset dowels with matched numbers on cape and base to simplify correct assembly, cast-in dimples to locate drill holes for lube fittings, vents, sensors and mounting modifications, housing base threaded to accept grade 5 cap bolts for added strength and pry slots between the cap and base to allow easy separation. Utilizes E design spherical roller bearing insert for higher load carrying capacity. Matches industry standard SAF mounting dimensions.

Dodge® Pillow Block Roller Bearing Unit, Type SAFS, 6 in Bore, 19-3/8 to 21-5/8 in Bolt Center-to-Center Length, 7-1/16 in Base to Bore Centerline, 24-3/4 in Overall Length, 9.91 in Overall Width, 14-9/16 in Overall Height, Four-Bolt Base Mounting, Tapered Bore, 6-3/4 in Base Width, Adapter Mounted Locking Device, Triple-Tect™ Seal, Non-Expansion (Fixed) Expansion, 300000 lb Dynamic/355000 lb Static Load, 1300 rpm Grease/1700 rpm Oil Maximum, Cast Steel

• 
  Catalog https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_035126_Catalog.pdf
• 
  Instruction/Installation Manual https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_042100_Manual.pdf