Dodge® 028130 DMSCB Finished Bore Clutch and Brake Module, 90 VDC, 22 ft-lb Torque, 5/8 in Dia Bore
Dodge® clutch/brake modules mount directly to NEMA C-Face motors and reducers or can be used with separate base mount frames. Units are designed with large ball-bearings to provide greater overhung load capacity and longer L10 life. Clutch/brake modules use larger armatures for high-torque transmission. Dodge®'s Dyna-Gap automatic air gap mechanism automatically compensates for friction surface wear. Completely factory assembled, tested and pre-burnished for easy installation, Dodge® clutch/brake modules offer long, maintenance free operation.
Dodge® Clutch and Brake Module, Finished Bore, Series: DMSCB, 5/8 in Bore, 6-3/4 in OD, 9.49 in Overall Length, 22 ft-lb Torque, 90 VDC, Shaft-In/Base Mounting, Die-Cast, 9.49 in L x 6-3/4 in W x 6.87 in H Dimensions
Dimensions | : | 9.49 in L x 6-3/4 in W x 6.87 in H |
Material | : | Die-Cast |
Mounting Type | : | Shaft-In/Base |
Outside Diameter | : | 6-3/4 in |
Overall Length | : | 9.49 in |
Series | : | DMSCB |
Type | : | Finished Bore |
Voltage Rating | : | 90 VDC |
Torque Rating | : | 22 ft-lb |
Bore Diameter | : | 5/8 in |