piwik image

027069

180 DBSC-V-35-MA-230/460 Dodge® 027069 D Series Finished Bore Motor Brake, 1-1/8 in Dia Bore, 6.63 in OD, 35 ft-lb Torque, 208 to 230/460 VAC V Coil

  • Item#: 171333
  • Mfr#: 027069
  • UPC: 782475924325
    • Rugged, die-cast aluminum housing mounts at any angle without modification
    • Internally rectified DC voltage coil operates on either AC or DC voltage
    • Splined hub permits uniform load distribution
    • Integral key design simplifies installation
    • Single, non-asbestos friction disc design extends life, reduces replacement parts and allows quiet operation
    • Wave spring provides 360 deg of force when power is removed from the brake
    • Easy-to-use, reliable manual release levers reset automatically
    • Class B insulation is standard
    • Manually adjusted wear method
    • 180TC frame
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

Dodge® D-series motor brakes are designed with a single non-asbestos friction disc for fewer adjustments, reduced replacement parts and extended life. When power is applied to the brake coil, the friction disc hub assembly and the load are free to turn. However, when power is taken away intentionally or accidentally, an internal wave spring clamps the friction disc to stop and hold the load. Dodge® D-series motor brakes are available with either standard or EZ Kleen (food duty/NEMA 4x) enclosures. Stock units are kept for both motor fan end mounted C-face brakes and double C-face brakes for use between C-face motors and C-face gear reducers. Both configurations use significantly fewer parts than competitive brakes, providing dramatic improvements in brake life, with lower energy consumption and significantly quieter operation than AC brake designs.

Dodge® Motor Brake, Finished Bore, Series: D Series, 1-1/8 in Bore, 6.63 in OD, 4.78 in Overall Length, 208 to 230/460 VAC Coil, 35 ft-lb Torque, C-Face/Fan-End Mounting, Standard Drip-Proof Enclosure, Die-Cast Aluminum

SPECIFICATIONS

Enclosure Type      :      Standard Drip-Proof
Material      :      Die-Cast Aluminum
Mounting Type      :      C-Face/Fan-End
Overall Length      :      4.78 in
Series      :      D Series
Type      :      Finished Bore
Bore Diameter      :      1-1/8 in
Outside Diameter      :      6.63 in
Torque Rating      :      35 ft-lb
Coil Voltage      :      208 to 230/460 VAC

DOCUMENTS

  • pdf
    Specification Sheet
    https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Dodge_027024_Specification_Sheet.pdf