piwik image

CR Seals® 32X50X10 HMSA10 V
CR Seals®

CR Seals® 32X50X10 HMSA10 V

loading
CR Seals®

32X50X10 HMSA10 V

CR Seals® 32X50X10 HMSA10 V Type HMSA10 Small Bore Radial Shaft Seal, 32 mm ID x 50 mm OD, 10 mm W, Fluoro Rubber Lip

  • Item#: 32X50X10 HMSA10 V
  • Mfr#: 32X50X10 HMSA10 V
    • With auxiliary lip
    • The lip has a sealing edge that is formed by molding, cutting or grinding
    • It is normally pressed against the counter face surface of the shaft, with a defined radial load, by a garter spring
    • The edge of the sealing lip and the shaft counter face surface form the most important functional area of a radial shaft seal
    • The sealing effect of the lip can be enhanced by designing the contact area of the lip with hydrodynamic features
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

CR Seals® Small Bore Radial Shaft Seal, Type HMSA10, 32 mm Inside Dia, 50 mm Outside Dia, 10 mm Width, V Cross Section, -40 to 392 deg F, Fluoro Rubber Lip

DOCUMENTS

  • pdf
    Specification Sheet
    https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/SKF_32X50X10_HMSA10_V_Specification_Sheet.pdf
  • pdf
    Catalog
    https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/SKF_8088_Catalog.pdf