Locations
Browning®
1430750
Browning® Gearbelt® 1430750 Type 2 Synchronous Timing Pulley With Flange, 1/4 to 3/8 in Bore, 0.999 in OD, 16 Grooves, 1.019 in Dia Pitch, 9/16 in W Face
- Item#: 16XLB037S
- Mfr#: 1430750
- UPC: 662289753864
- Constant speed, no slip, no creep, minimum backlash, because of the positive grip of the belt teeth with pulley grooves
- High modulus strength member, needs minimum take-up
- Freedom from initial belt tension, reduces bearing loads, increases life
- Compact design Gearbelt® belts permit smaller pulleys, shorter centers and narrow belts
- Lightweight, high horsepower-to-weight ratio makes Gearbelt® drives ideal for any application where weight is an important factor
- Less heat, because Gearbelt® drives generate virtually no friction
- No lubrication required
- Wide load capacity range
- Wide belt speed range
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Gearbelt® Synchronous Timing Pulley, Type 2, 1/4 to 3/8 in Bore Dia, 0.999 in Outside Dia, 1.019 in Pitch Diameter, 16 Grooves, 1/5 in Pitch, 9/16 in Face Width, 1-1/4 in Flange Dia, 11/16 in Hub Dia, 1/4 in Hub Projection, MPB Bushing, 13/16 in OAL, For Use With: 3/8 in W XL Type Belt, Steel
SPECIFICATIONS
| Bushing Type | : | MPB |
| Flange Diameter | : | 1-1/4 in |
| Hub Diameter | : | 11/16 in |
| Hub Projection | : | 1/4 in |
| Material | : | Steel |
| Overall Length | : | 13/16 in |
| Pitch | : | 1/5 in |
| Suitable For Use With | : | 3/8 in W XL Type Belt |
| Type | : | Type 2 |
| Bore Diameter | : | 1/4 to 3/8 in |
| Outside Diameter | : | 0.999 in |
| Number of Grooves | : | 16 |
| Pitch Diameter | : | 1.019 in |
| Face Width | : | 9/16 in |
