piwik image

Browning® 1228832
Browning®

Browning® 1228832

loading
Browning®

1228832

Browning® 1228832 Finished Bore Straight Miter Gear With Hardened Teeth, Keyway and Setscrew, 3/4 in Dia Bore

  • Item#: YSM10F20HX3/4
  • Mfr#: 1228832
  • UPC: 662289186440
    • Bevel and miter gears develop axial thrust, adequate bearing support must be provided
    • Miter gears must be run in sets of two or more gears with the same pitch, pressure angle and number of teeth
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading

DESCRIPTION

Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.

Browning® Straight Miter Gear, Finished Bore, 3/4 in Bore Dia, 1:1 Gear Ratio, 20 Teeth, 10 Diametral Pitch, 2 in, 0.44 in Face Width, 1-5/8 in Hub Dia, 13/16 in Hub Projection, 1-23/64 in Overall Length, 20 deg Pressure Angle, 3/16 x 3/32 in Keyway, Steel

SPECIFICATIONS

Gear Ratio      :      1:1
Hub Diameter      :      1-5/8 in
Hub Projection      :      13/16 in
Keyway Size      :      3/16 x 3/32 in
Overall Length      :      1-23/64 in
Type      :      Finished Bore
Diametral Pitch      :      10
Pressure Angle      :      20 deg
Number of Teeth      :      20
Pitch Diameter      :      2 in
Face Width      :      0.44 in
Bore Diameter      :      3/4 in
Material      :      Steel

DOCUMENTS

  • pdf
    Catalog
    https://www.purvisindustries.com//ASSETS/DOCUMENTS/ITEMS/EN/Browning_3426954_Catalog.pdf