Locations
Browning®
1058304
Browning® Gearbelt® 1058304 Type 11 Synchronous Timing Pulley With Flange, 1-3/8 to 3-5/8 in Split Taper Bore, 7.838 in OD, 20 Grooves, 7.958 in Dia Pitch, 4-3/4 in W Face
- Item#: 20XXHR400
- Mfr#: 1058304
- UPC: 662289154975
- Constant speed, no slip, no creep, minimum backlash, because of the positive grip of the belt teeth with pulley grooves
- High modulus strength member, needs minimum take-up
- Freedom from initial belt tension, reduces bearing loads, increases life
- Compact design Gearbelt® belts permit smaller pulleys, shorter centers and narrow belts
- Lightweight, high horsepower-to-weight ratio makes Gearbelt® drives ideal for any application where weight is an important factor
- Less heat, because Gearbelt® drives generate virtually no friction
- No lubrication required
- Wide load capacity range
- Wide belt speed range
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Gearbelt® Synchronous Timing Pulley, Type 11, Split Taper Bore, 1-3/8 to 3-5/8 in Bore Dia, 7.838 in Outside Dia, 7.958 in, 20 Grooves, 1-1/4 in Pitch, 4-3/4 in Face Width, 8-11/16 in Flange Dia, 5-3/8 in Hub Dia, 1/8 in Hub Projection, R2 Bushing, 5-5/32 in Overall Length, For Use With: 4 in W Type XXH400 Belt
SPECIFICATIONS
| Bushing Type | : | R2 |
| Flange Diameter | : | 8-11/16 in |
| Hub Diameter | : | 5-3/8 in |
| Hub Projection | : | 1/8 in |
| Overall Length | : | 5-5/32 in |
| Pitch | : | 1-1/4 in |
| Suitable For Use With | : | 4 in W Type XXH400 Belt |
| Type | : | Type 11 |
| Bore Diameter | : | 1-3/8 to 3-5/8 in |
| Bore Type | : | Split Taper |
| Outside Diameter | : | 7.838 in |
| Number of Grooves | : | 20 |
| Pitch Diameter | : | 7.958 in |
| Face Width | : | 4-3/4 in |
