Locations
Browning®
1055888
Browning® Gearbelt® 1055888 Type 2 Synchronous Timing Pulley With Flange, 1 to 2-1/4 in Bore, 5.46 in OD, 20 Grooves, 5.57 in Dia Pitch, 2-9/16 in W Face
- Item#: 20XHB200
- Mfr#: 1055888
- UPC: 662289112890
- Constant speed, no slip, no creep, minimum backlash, because of the positive grip of the belt teeth with pulley grooves
- High modulus strength member, needs minimum take-up
- Freedom from initial belt tension, reduces bearing loads, increases life
- Compact design Gearbelt® belts permit smaller pulleys, shorter centers and narrow belts
- Lightweight, high horsepower-to-weight ratio makes Gearbelt® drives ideal for any application where weight is an important factor
- Less heat, because Gearbelt® drives generate virtually no friction
- No lubrication required
- Wide load capacity range
- Wide belt speed range
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Gearbelt® Synchronous Timing Pulley, Type 2, 1 to 2-1/4 in Bore Dia, 5.46 in Outside Dia, 5.57 in Pitch Diameter, 20 Grooves, 7/8 in Pitch, 2-9/16 in Face Width, 6-1/8 in Flange Dia, 4-1/8 in Hub Dia, 1 in Hub Projection, MPB Bushing, 3-9/16 in OAL, For Use With: 2 in W XH200 Type Belt
SPECIFICATIONS
| Bushing Type | : | MPB |
| Flange Diameter | : | 6-1/8 in |
| Hub Diameter | : | 4-1/8 in |
| Hub Projection | : | 1 in |
| Overall Length | : | 3-9/16 in |
| Pitch | : | 7/8 in |
| Suitable For Use With | : | 2 in W XH200 Type Belt |
| Type | : | Type 2 |
| Bore Diameter | : | 1 to 2-1/4 in |
| Outside Diameter | : | 5.46 in |
| Number of Grooves | : | 20 |
| Pitch Diameter | : | 5.57 in |
| Face Width | : | 2-9/16 in |
