Boston GearĀ® H1076LH Spiral Tooth Helical Gear Worm With 0.188 in Keyway, 8 Diametral Pitch, 14.5 deg Pressure Angle, 1 Threads, Left Hand Rotation, 1-1/2 in Dia Pitch, 3/4 in Dia Bore, 1-3/4 in W Face, 4 deg 46 min Lead Angle, Steel
When used with worm gears, Boston Gear® worms provide an effective answer for power transmission applications requiring high ratio speed reduction in a limited space using right angle (90 deg), non-intersecting shafts. Manufactured from acetal, nylon and hardened and unhardened steel, they offer the smoothest, quietest form of gearing when properly applied. Because the efficiency of a worm gear drive depends on the lead angle and number of starts on the worm, it's important to keep the ratio as low as possible. It is equally important that worms and worm gears used together must have the same diametrical pitch and threads.
Boston Gear® Helical Gear Worm, Spiral Tooth, 3/4 in Bore, 1-3/4 in OD, 1 Threads, 8 Diametral Pitch, 1-1/2 in Pitch Diameter, 1-3/4 in Face Width, 4 deg 46 min Lead Angle, Left Hand Direction of Rotation, 1-3/4 in Overall Length, 14.5 deg Pressure Angle, Steel
Outside Diameter | : | 1-3/4 in |
Overall Length | : | 1-3/4 in |
Type | : | Spiral Tooth |
Diametral Pitch | : | 8 |
Pressure Angle | : | 14.5 deg |
Number of Threads | : | 1 |
Direction of Rotation | : | Left Hand |
Pitch Diameter | : | 1-1/2 in |
Bore Diameter | : | 3/4 in |
Face Width | : | 1-3/4 in |
Lead Angle | : | 4 deg 46 min |
Material | : | Steel |