Locations
Boston Gear®
G692
Boston Gear® G692 Internal Spur Gear, 16 Diametral Pitch, 14.5 deg Pressure Angle, 0.317 in W Face, 64 Teeth, 3.96 in ID x 4-3/4 in OD, 4 in Dia Pitch, Brass
- Item#: G692
- Mfr#: G692
- UPC: 781711120422
- Manufactured from brass and these gears are ideal and cost effective for a broad range of light duty applications
- Their non-binding tooth design ensures smooth and quiet operation
- Higher contact ratio for a smoother, quieter operation with 14.5 deg pressure angle
- Min. Order Qty: 1
- Qty. Interval: 1
DESCRIPTION
Boston Gear® internal gears are spur gears turned "inside out." In other words, the teeth are cut into the inside diameter while the outside diameter is kept smooth. This design allows for the driving pinion to rotate internal to the gear, which, in turn, allows for clean operation. Intended for light duty applications, these gears are available only in brass. When choosing a mating spur gear, always remember that the difference in the number of teeth between the internal gear and pinion should not be less than 15 (14.5 deg PA) or 12 (20 deg PA).
Boston Gear® Internal Spur Gear, 3.96 in ID, 4-3/4 in OD, 64 Teeth, 16 Diametral Pitch, 4 in Pitch Diameter, 0.317 in Face Width, 14.5 deg Pressure Angle, Brass
SPECIFICATIONS
| Diametral Pitch | : | 16 |
| Pressure Angle | : | 14.5 deg |
| Face Width | : | 0.317 in |
| Number of Teeth | : | 64 |
| Inside Diameter | : | 3.96 in |
| Outside Diameter | : | 4-3/4 in |
| Pitch Diameter | : | 4 in |
| Material | : | Brass |
